SP Class MM-2 Cab Forward No. 4208 after an additional leading axle upgrade.
Classic Streamliners - TRAINCYCLOPEDIA
Southern Pacific Class MM-2 Mallet-Mogul Cab Forward Steam Locomotive
The MM-2 class of steam locomotives were the Southern Pacific's (SP) only class of 2-6-6-2 locomotives ordered and built as cab forward locomotives. They were built in 1911 by Baldwin Locomotive Works and entered service on the SP beginning September 19, 1911. By 1914, they had all been upgraded with an additional leading axle making them 4-6-6-2 locomotives. They reclassified their MM-2 as AM-2. This was done to improve handling at speed. These locomotives were the predecessors of the AC-12 class cab forward locomotives built during World War II.
SP used these locomotives in the Sierra Nevada for about 20 years, retiring them in the mid-1930s. They were stored in the railroad's Sacramento, California, shops for a couple years before being rebuilt with 4B Worthington feedwater heaters and uniform cylinders (compound to simple) measuring 22 in × 28 in (559 mm × 711 mm), diameter × stroke. The rebuilds increased the class weight to 424,200 lb (192,400 kg) with 356,900 lb (161,900 kg) on the drivers, 210 psi (1.4 MPa) boiler pressure and 76,800 lbf (342 kN) tractive effort.
The rebuilt locomotives were renumbered into the 3900 series then used on SP's Portland Division in Oregon until they were again retired in the late 1940s. The locomotives were all scrapped soon after retirement with the last, 3907 (originally 4207), on September 23, 1948.
Southern Pacific class MM-2 Overview
Type and origin
Power type: Steam
Builder: Baldwin Locomotive Works
Serial numbers: 36684, 36685, 36687–36689, 36703–36705, 36726, 36727, 36740, 36783
Build dates: July–August 1911
Configuration: 2-6-6-2 Mallet-Mogul
UIC class: (1′C)C1′ n4v
Gauge: 4 ft 8 1⁄2 in (1,435 mm) standard gauge
Driver diameter: 63 in (1,600 mm)
Adhesive weight: 320,100 lb (145,200 kg)
Loco weight 384,800 lb: (174,500 kg)
Total weight 568,000 lb: (258,000 kg)
Fuel type: Fuel oil
Fuel capacity: 3,200 gal (12,000 l; 2,700 imp gal)
Water capacity: 10,000 gal (38,000 l; 8,300 imp gal)
• Firegrate area: 70 sq ft (6.5 m2)
Boiler pressure: 200 psi (1.38 MPa)
Feedwater heater: 4B Worthington
Heating surface: 5,292 sq ft (491.6 m2)
Cylinders Four: two high pressure (rear), two low pressure (front)
High-pressure cylinder: 25 in × 28 in (635 mm × 711 mm)
Low-pressure cylinder: 38 in × 28 in (965 mm × 711 mm)
Valve gear: Walschaerts
Tractive effort: 74,070 lbf (329.48 kN)
Text: wikipedia.org. Images: Public Domain; http://www.commons.wikimedia.org (unless otherwise specified) and 17 U.S. Code § 107 fair use. References: Lewis, Robert G. The Handbook of American Railroads. New York: Simmons-Boardman Publishing Corporation, 1951, 2nd Edition 1956. Site Map Contact webmaster HERE.
Purchases through our Merchant Links and Store help to defray the costs of operating the non-profit Classic Streamliners website, and at no additional cost to you. All of the staff at Classic Streamliners are unpaid volunteers who have all devoted thousands of hours of their own time to bring the site into fruition. We would like to sincerely thank all those who have already helped support this worthy cause. For more information click HERE.